Maximum output: 9.1 kg/min
Maximum fluid working pressure: 138 bar
Maximum inlet air pressure: 8.3 bar
Air consumption @ 100 psi: 23 scfm (with Fusion® AP AR4242)
System air consumption @ 100 psi with 2:1 feed pumps: 28 scfm at flow rate listed above
Maximum fluid temperature: 82°C
Maximum heater wattage: 6.000 watts
Maximum hose length: 95 m
Power requirements:
39A at 230V, 1-phase
22A at 230V, 3-phase
14A at 380V, 3-phase (4-wire)
Weight: 114 kg
Dimensions: H = 99 / W = 69 / D = 64 cm


Cost-effective, high-performance, air-driven foam proportioner

• Great for residential foam insulation spraying.
• Combines Gusmer’s proven reliability with Graco’s advanced performance and control.
• Simple to operate and maintain.
• Longer life and improved reliability.

Maximum fluid working pressure: 140 bar
Maximum fluid temperature: 68°C
Maximum output: 5.4 kg/min at 340 cycles/min
Output per cycle (A and B): 0,0133 l
Heater power
120V models: 850 W each; 1700 W total
240V models: 1000 W each; 2000 W total
Tank capacity: 26,5 liters each (nominal)
Weight
Heated units: 72 kg
Unheated units: 68 kg
Dimensions: H = 112 cm / W = 67 cm / D = 76 cm
Wetted parts: Aluminum, stainless steel, carbon steel, brass, carbide, chrome, chemically resistant o-rings, PTFE, ultra-high molecular weight polyethylene


Get in and get smaller jobs done fast without sacrificing performance. Graco’s portable E-10 sprayers are ideal for pluralcomponent spray, joint-fill jobs and touchups. With smart controls that are easy to setup and simple to operate, the E-10 is a natural complement to any proportioning equipment line-up.

Maximum output: 5,6 liters/min
Maximum rated pressure: 108 bar
Viscosity: 250-1500 cps
Air requirement: 12 liters/sec @ 7 bar
Electrical: 40 amps @ 1 x 220; 50/60 Hz 8.7 Kw
25 amps @ 3 x 380; 50/60 Hz 8.7 Kw
Weight: 113 kg
Dimensions: H = 81 cm / W = 51 cm / D = 76 cm

• Compact, lightweight, and mobile design.
• Designed for economical, low output spraying or pouring of plural component chemical systems.
• Ideal for use in roofing, construction, and other related field applications.
• Very popular for in-plant operations and laboratory use.

Maximum output: 10 kg/min
Maximum fluid working pressure: 140 bar
Maximum ambient temperature: 60° C
Maximum fluid temperature: 88° C
Maximum heater wattage: 15.300 watts
Hose length: 64 m or 94 m
Weight: 8 kw – 226 kg; 15 kw – 238 kg
Dimensions: H = 140 cm / W = 101 cm / D = 560 cm

• Ideal for spraying foam and polyurea
• Performance-driven horizontal pumping system
• SoftStart™ feature requires 1/3 less power draw during system startup
• System controls with diagnostics and auto shutdown
• Lightweight, yet durable hydraulics

Maximum output: 14 / 9 kg/min
Minimum output: 1 kg/min
Maximum pressure rating: 138 / 240 bar
Weight: 200 kg (empty), 280 kg (full)
Dimensions: H = 130 cm / W = 104 cm / D = 90 cm
Electrical: 36 amps @ 3 x 400v; 50 Hz
32 amps @ 3 x 400v; 60 Hz









The H-20/35-GE Proportioning Unit is designed to process a wide range of plural component systems, each with their unique characteristics. The H-20/35-GE incorporates the proven principles of its predecessors enhanced by many technical innovations specifically developed to provide high pressure for mixing and atomizing, precise temperature control, and ease of maintenance. The H-20/35-GE Proportioning Unit is designed to process high performance plural component coating systems where increased operating pressures are necessary to process higher viscosity and tougher to mix chemical systems.

Maximum output: 14 kg/min
Minimum output: 1 kg/min
Maximum pressure rating: 138 bar
Electrical: 45 amps @ 3 x 220v; 50/60 Hz
38 amps @ 3 x 380v; 50/60 Hz
Weight: 175 kg
Dimensions: H = 119 cm / W = 102 cm / D = 56 cm

• Upgradable to 3500 psi.
• Hydraulically operated to accurately dispense plural component chemical systems.
• State of the art controllers provide automatic control of chemical process temperatures.
• Excellent machines for spray or pour applications at higher viscosity and tougher to mix chemical systems.