Maximum output: 14 kg/min
Minimum output: 3 kg/min
Max. fluid operating pressure: 138 bar
Air supply: 2.4 l/sec @ 6-8 bar
Mixing: Internal impingement, airless atomization, solvent free, mechanically self-cleaning
Weight: 3 kg
Dimensions: H = 24 cm / W = 32 cm / D = 8 cm

• Designed for pouring applications where low forward velocity and laminar flow of material is desired.
• Ideally suited for industrial cavity fill and field pouring applications.
• A variety of impingers allow for the adjustment of outputs and operating pressures.

Excellent for roofing, adhesives, spray polyurethane foam application, and polyureas.

Materials sprayed: Foam and coatings
Maximum output: 18 kg/min
Minimum output: 1,4 kg/min
Maximum fluid operating pressure: 240 bar
Max. operating air inlet pressure: 9 bar
Max. fluid temperature: 93°C
Weight: 1,1 kg
Dimensions: H = 19 cm / W = 20,6 cm / D = 8,4 cm
Applications: Residential foam insulation, roofing, concrete, waterproofing and other polyurethane foams and elastomeric coatings.




The Easiest-to-Use Gun on the Market

• Easy-to-use design makes maintenance quick and easy.
• Longer life, hardened stainless steel mix chambers.
• Longer life side seals – choose from hardened stainless steel or polycarballoy options.
• Advanced mix module and tip design improves mixing.
• Solvent-resistant components and o-rings let you soak the whole gun without swelling or damage.
• Daily maintenance in a matter of seconds with the quick-shot grease port.

Materials sprayed: Foam and polyurea
Max. output: 11,3 kg/min
Min. output: < 0,45 kg/min
Max. fluid operating pressure: 240 bar
Max. working air inlet pressure: 9 bar
Max. fluid temperature: 93° C
Weight: 1,2 kg
Dimensions: H = 15,9 cm / W = 20,3 cm / D = 8,4 cm
Applications: Residential foam insulation, roofing, other polyurethane foams and polyurea





ClearShot Technology sets the Fusion CS gun apart from every other gun. The secret of the revolutionary ClearShot Technology is the blue, non-toxic ClearShot Liquid. ClearShot Liquid is contained in a disposable, non-reusable cartridge, which is easily inserted into the gun’s ergonomic handle. Every time the trigger is pulled, ClearShot Liquid dispenses into the mix chamber and dissolves any built-up chemical - keeping it clean.

Materials sprayed: Foam and coatings
Maximum production: 18 kg/min
Minimum production: 1,4 kg/min
Maximum fluid operating pressure: 207 bar
Max. working air inlet pressure: 8,6 bar
Max. fluid temperature: 93° C
Weight: 1,06 kg
Dimensions: H = 17,8 cm / W = 17,8 cm / D = 11,2 cm
Applications: Residential foam insulation, roofing, concrete, waterproofing and other polyurethane foams and elastomeric coatings

• Lighter and more compact than other air purge guns on the market.
• Designed for fast easy maintenance, on-site versatility and long life.
• Simple to operate: out of the box and spraying in 5 minutes.

Materials sprayed: Foam
Maximum production: 18 kg/min
Minimum production: 1,6 kg/min
Maximum operating pressure: 240 bar
Max. working air inlet pressure: 8,6 bar
Max. fluid temperature: 93° C
Weight: 1,6 kg
Dimensions: H = 23 cm / W = 24 cm / D = 11 cm
Applications: Residential foam insulation, roofing, concrete and other polyurethane foams

• World renowned, proven itself as the “Gun of Choice”.
• Mechanically self-cleaning eliminates costly solvent flushing.
• Its versatility allows the applicator to spray or pour in a variety of different output volumes.
• Optional automatic version for automated operation and timed shots.

Materials sprayed: Coatings
Maximum output: 0,7 kg/min
Minimum output: < 0,45 kg/min
Max. operating pressure: 240 bar
Max. operating air inlet pressure: 8,6 bar
Max. fluid temperature: 93° C
Weight: 1,04 kg
Dimensions: H = 17,8 cm / W = 19 cm / D = 6,4 cm
Applications: Very low output, fast-set polyurea, polyurethane and hybrid coatings

• Save up to 50% or More* on material consumption and significantly reduce over-spray associated with low-output spraying.
• Superb balance, weight and size for effortless maneuverability. “Get in close” capabilities for small areas and hard to reach applications.
• Spray Tip and Gun Block are constructed of a special “space age” non-stick coating for easy maintenance.

*Reduction in material consumption results may differ depending upon the combination of temperature, equipment, viscosity, type of material and application

Materials sprayed: Foam
Maximum production: 7,2 kg/min
Minimum production: 1 kg/min
Maximum operating pressure: 69 bar
Max. operating air inlet pressure: 7,6 bar
Max. fluid temperature: 65°C
Weight: 1,04 kg
Dimensions: H = 20 cm / W = 23 cm / D = 6 cm
Applications: Low to medium output foam applications

• Mechanically self-cleaning eliminates costly solvent flushing.
• A variety of mixing hamber sizes allow the operator to fine tune the round spray pattern to suit virtually any application.
• Ideal for small to medium output applications, such as behind pipes or truck and trailer bodies.
• Field proven as a reliable, lightweight, easy to operate and maintain.